AlteliConnect™ Fiberglass Outdoor Enclosure for SONOS© Connect:Amp™ ZP120
- Dual 4" Vents with Rain Shields to Expel Heat
- Fiberglass Reinforced Polyester, FRP
- Stainless Steel Latches with Padlock hasps
- Internal 120VAC Outlets
- Includes Rugged Aluminum Amplifier Mounting Plate and Brackets
- Pre-wired 5 foot power cord
- (4) Stainless Steel Mounting Feet Included
- NEMA Type 3R, 3RX / IP24 Rated
- Outdoor use of the SONOS® Connect:Amp™
- Pool side, backyard audio entertainment systems
- Outdoor hotel and hospitality audio entertainment systems
- Marine audio entertainment systems
- Protection of Connect:Amp™ from Theft or Damage
The Altelix AlteliConnect™ Fiberglass Outdoor Enclosure is a heavy duty commercial grade weatherproof fan-cooled enclosure designed to provide indoor or outdoor protection for the SONOS® Connect:Amp™.
Install your SONOS® Connect:Amp™ Securely in Unattended Areas
This rugged enclosure is molded from durable and UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. It features a stainless steel continuous door hinge and stainless steel latches with provision for padlocks. The door is fully gasketed making this enclosure suitable for use indoors or outdoors.
Plug and Play Setup
The AlteliConnect™ enclosure provides easy plug-n-play installation. The Connect:Amp™ mounts easily inside the enclosure with our aluminum mounting system featuring foam padding to help ensure your Connect:Amp™ stays scratch free. Once secured inside the enclosure, connect the amplifier's power cord to the 120VAC power outlet provided inside the enclosure. A cable grommet on the enclosure allows speaker and Ethernet cables to be connected to the amp. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.
Cooling Fan Ventilation
The AltelixConnect™ NFS14 enclosure features dual 4" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure, and the internal aluminum mesh filters are removable for cleaning. Dual fans are also available by request.
Four removable stainless steel mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. An optional pole mounting kit (model NMKS-300-08) is also available.
The AlteliConnect™ Enclosure is also available in Black. Note: The black enclosure is not recommended for constant direct Sunlight installations due to excessive heat.
Application Note: This enclosure is designed specifically for use only with the SONOS® Connect:Amp™ (model #ZP120).
The following SONOS® products are not compatible with the AlteliConnect™ enclosure; SONOS® ZonePlayer (model ZP100) and the new SONOS® AMP (model #AMPG1US1BLK). Be sure to check the model number on your SONOS® device before ordering.
||Fiberglass Reinforced Polyester
|Cooling Fan Turn-On Temperature
|Cooling Fan Turn-Off Temperature
||15.7 x 13.8 x 6.5 Inches
(401 x 352 x 164 mm)
||13.87 x 11.97 x 6.2 Inches
(352 x 304 x 154 mm)
|Mounting Plate Material
||0.10 in (2.5 mm) Aluminum
|Mounting Plate Dimensions
||10.9 x 12.8 in. (276 x 324 mm)
|Power Cord Length
||5 Feet (1.5m)
||NEMA Type 3R, 3RX / IP24