IMPORTANT NOTE: LEAD TIMES VARY BETWEEN BRANDS AND ARE FREQUENTLY CHANGING. PLEASE EMAIL US DIRECTLY AT INFO@ENCLOSUREHUB.COM FOR LEAD TIMES PRIOR TO SELECTING EXPEDITED SHIPPING SERVICES. NOT ALL PRODUCTS ARE AVAILABLE TO SHIP SAME DAY.
Designed to fit the Amazon eero® 6 (Model N010011) and eero® 6 Extender (Model Q010011)
Plug-and-Play Design, Easy to Install
Two (2) 2¼" Vents with Rain Shields and Screens
Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate
Pre-Wired 120VAC Power Outlet with Pre-wired 5 foot Power Cord
Includes Cable Glands and Grommets Zip Ties, Cable Management Straps and Wall Mounting Hardware
Meets NEMA 3R, 3RX and IP24
Weatherproof and UV Stable Durable Polycarbonate + ABS Construction
Gasketed Lid featuring a Tamper-Proof Locking Screw with Key and Provision for Padlock
Integral Mounting Feet
Optional Pole Mount Kit Available
Protection of the eero® 6 and eero® 6 Extender from Theft or Damage
Indoor or outdoor installations
Concealment of Equipment
Deployment of Hospitality Wireless Networks
Retail and Commercial Wireless Networks
Protect Your Amazon eero® 6 and eero® 6 Extender
TheAltelix NP12VA1-EER3is a vented weatherproof enclosure designed to provide added security, vandalism and protection from harsh environments, while allowing ventilation for the Amazon eero® 6 WiFi router and Amazon eero® 6 Extender. It features two 2¼" inch air vents with rain shields and screens.
Install Your Amazon eero® 6 Securely This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.
Amazon eero® 6 and eero® 6 Extender Mount The NP12VA1-EER3 features a mounting cradle specifically designed for both the Amazon eero® 6 WiFi Router and Amazon eero® 6 Extender. Installation is easy, simply slide the eero® 6 into the mounting cradle. For extra security and installations subject to vibrations, an optional hook and loop strap is provided to secure the eero® 6 within the mounting cradle. The mounting cradle is designed so that it will not interfere with any of the ports on the eero® 6 such as power and Ethernet.
Plug and Play Setup The NP12VA1-EER3 enclosure provides easy plug-n-play installation. Once the eero® 6 is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland and cable grommets on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.
RF Transparent Design The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.
Complete with Cable Grommets and Glands and Wire Management Straps For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
Mounting The external mounting feet on the NP12VA1-EER3 allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. TheNMKG-150-08attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.
Additional Products Available for Amazon eero® Altelix has a full line of enclosures and mounts designed for use with Amazon eero® wireless products including the eero® mesh router, eero® Pro, eero® Pro 6E, eero® 6 and eero® 6 Extender.
eero® is a trademark or registered trademark of Amazon Technologies, Inc.