Altelix 12x9x7 Polycarbonate + ABS Vented RF Transparent Outdoor WiFi Enclosure with Cooling Fan, 120 VAC Outlets & Power Cord

Altelix SKU: NP120907TVFA1C

$221.04

Lead Time: ESTIMATED Lead Time of 1-2 Business Days' Time of Order Entry

Availability: Green & Tan Are Out Of Stock. Gray Is In Stock As Of 9/26/24

Important: Lead times vary frequently! Please contact us with any questions and/or concerns. We may be reached directly through chat or email us at info@enclosurehub.com

Our business hours are Monday-Friday 7:30 AM - 4:30 PM EST. Orders will not be entered outside of business hours.

Features
  • New and Improved design provides better versatility and security
  • Thermostat controlled cooling fan to help expel heat
  • Dual vents with rain shields and screens
  • No electrical wiring required
  • (2) Internal pre-wired 120VAC power outlets
  • Pre-wired 5 foot 3-prong power cord
  • Integral internal mounting bosses for use with equipment mounting plates or DIN rails
  • Durable Polycarbonate + ABS construction
  • Weatherproof and UV Stable
  • Meets NEMA 3R, 3RX and IP24
  • Gasketed lid with dual stainless steel latches
  • Tamper-Proof locking screw with key and provision for padlock
  • Can be mounted using external feet or internal mounting points
  • RF transparent for wireless devices
  • Multiple size knock-out holes on bottom of enclosure
  • Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware
  • Optional pole mount kits available
Applications
  • Indoor / Outdoor WiFi access points and routers
  • Multi purpose utility box
  • Home automation
  • WiFi, LoRa and RFID gear
  • Security and surveillance systems
  • LED controllers
  • IoT devices
  • Network switches
  • Media converters
  • Cable TV and CCTV amplifiers
  • Broadband equipment
  • SCADA remote terminal
  • Outdoor weather protection
  • Protection against theft or damage
  • Warehouses and public areas
  • Concealment of equipment

Ordering Information: An equipment mounting plate is NOT included with this new model. Additional models are available with metallic and non-metallic plates. See below for more information.

New and Improved!
Altelix is excited to offer the newly redesigned NP120907 series enclosures. Some of the new features include:

  • Dual stainless steel latches
  • Multiple mounting options - (4) external mounting feet and internal mounting points
  • Deeper enclosure base
  • Increased number of multiple sized knock-out holes provided on bottom of enclosure
  • Raised bosses in base for use with optional mounting plates and DIN rail kits
  • Now with (2) 120VAC power outlets

The Altelix NP120907VFA1C NEMA enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two internal pre-wired 120VAC power outlets are provided to power your equipment.

Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.

Cooling Fan Ventilation
The NP120907VFA1C features dual vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.

Equipment Mounting Options
This enclosure provides multiple ways to install equipment. Raised bosses located in the base of this enclosure can be used to mount an equipment plate. These same bosses can also be used to installed up to four 35mm Top Hat DIN Rail kits available from Altelix. A large flat section is also provided in the base for use with the hook-n-loop tape included in the accessory kit.

Note: this enclosure is also available with an aluminum equipment mounting plate (see NP120907VPFA1C) or a non-metallic PVC equipment mounting plate (see NP120907VMFA1C).

RF Transparent Design
The NP120907VFA1C is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless access points on the market.

Secure Your Equipment
These NP series enclosures feature a gasketed lid with dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.

Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.

Multiple Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.

Material PC+ABS Polycarbonate / ABS Blend
Color Gray
Voltage 120VAC
Max Load 10A @ 120VAC
Cooling Fan Turn-On Temperature 100°F (38°C) ±6°F
Cooling Fan Turn-Off Temperature 79°F (26°C) ±9°F
Outer Dimensions
(Height x Width x Depth)
13.0 x 10.2 x 8.2 Inches
(332 x 259 x 208 mm)
Inner Dimensions*
(Height x Width x Depth)
7.8 x 7.1 x 4.5 inches
(198 x 180 x 114 mm)
Weight 4.8 lbs. (2.2 kg)
Power Cord Length 5 Feet (1.5m)
Ratings NEMA Type 3R, 3RX / IP24
Flame Rating Meets UL94-V0
Industry Certifications CE
Knockout Sizes (Diameter) (4) 0.62 in. (16 mm)
(4) 1.02 in. (26 mm)
(1) 1.30 in. (33 mm)
*Interior dimensions represent maximum space available for equipment.