Features
|
Applications
|
 
The Altelix NP171406VA1C Vented Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Power
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5-foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. The enclosure can also be hard wired by an electrician or qualified installer. An external ground lug is provided. Two cable grommets on the enclosure allows cables to be connected to internal devices. Knockouts are provided on the enclosure for additional wiring. Extra cable grommets are included with the accessory kit.
Ventilation
This enclosure features two 3 inch air vents with cleanable screens. Rain shields help prevent rain water from entering the enclosure.
Aluminum Equipment Mounting Plate
The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.
Material | PC+ABS Polycarbonate / ABS Blend |
Available Colors | Gray, Black, Light Ivory, OD Green |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Outer Dimensions (Height x Width x Depth) |
16.5 x 13.7 x 6.5 Inches (420 x 348 x 166 mm) |
Inner Dimensions* (Height x Width x Depth) |
11.5 x 9.0 x 4.1 Inches (292 x 229 x 104 mm) |
Mounting Plate Material | 0.08 in (2.0 mm) Aluminum |
Mounting Plate Dimensions | 14.9 x 11.2 in. (378 x 284 mm) |
Weight | 6.4 lbs. (2.9 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | NEMA Type 3R, 3RX / IP24 |
Flame Rating | Meets UL94-V0 |
Knockout Sizes (Diameter) | (4) 0.62 in. (16 mm) (4) 1.02 in. (26 mm) (4) 1.30 in. (33 mm) |
*Notes: 1) Interior dimensions represent maximum space available for equipment. |