Altelix 12x9x9 Polycarbonate + ABS Vented Enclosure with Aluminum Equipment Mounting Plate, 120 VAC Outlets & Power Cord

Altelix SKU: NP120909VPA1C

$202.61

Lead Time: ESTIMATED Lead Time of 1-2 Business Days' Time of Order Entry

Availability: In Stock As of 9/3/24

Important: Lead times vary frequently! Please contact us with any questions and/or concerns. We may be reached directly through chat or email us at info@enclosurehub.com

Our business hours are Monday-Friday 7:30 AM - 4:30 PM EST. Orders will not be entered outside of business hours.

Features
  • New design provides better versatility and security!
  • No electrical wiring required
  • (2) Internal pre-wired 120VAC power outlets
  • Pre-wired 5 foot 3-prong power cord
  • Dual vents with rain shields and screens to help expel heat
  • Features an aluminum equipment mounting plate
  • Durable Polycarbonate + ABS construction
  • Weatherproof and UV Stable
  • Meets NEMA 3R, 3RX and IP24
  • Extra deep gasketed lid with dual stainless steel latches
  • Tamper-Proof locking screw with key and provision for padlock
  • Can be mounted using external mounting feet or internal mounting feet
  • RF transparent for wireless devices
  • Multiple size knock-out holes on bottom of enclosure
  • Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware
  • Optional pole mount kits available
Applications
  • Indoor / Outdoor WiFi access points and routers
  • Multi purpose utility box
  • Home automation
  • WiFi, LoRa and RFID gear
  • Security and surveillance systems
  • LED controllers
  • IoT devices
  • Network switches
  • Media converters
  • Cable TV and CCTV amplifiers
  • Broadband equipment
  • SCADA remote terminal
  • Outdoor weather protection
  • Protection against theft or damage
  • Warehouses and public areas
  • Concealment of equipment

 

The Altelix NP120909VPA1C NEMA enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two internal pre-wired 120VAC power outlets are provided to power your equipment.

Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.

Increased Interior Space
This enclosure features an extra deep gasketed lid, over 4 inches deep. With the generous size of this enclosure and extended lid the NP120909VPA1C can accommodate a wide range of equipment.

Ventilation
The NP120909VPA1C features two vents with rain shields to help expel heat from inside the enclosure. Screens on the inside of the vents can be removed and cleaned as required.

Aluminum Equipment Mounting Plate
Included with this enclosure is a 1.5mm thick aluminum plate for mounting and securing equipment. The plate can be easily drilled and modified by the installer to suit unique site requirements.

Note: this enclosure is also available with a non-metallic PVC equipment mounting plate (see NP120909VMA1C) and without an equipment mounting plate (see NP120909VA1C).

Secure Your Equipment
These NP series enclosures feature dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.

Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.

Multiple Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.

Customization
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.