Altelix 14x11x7 Polycarbonate + ABS Vented DIN Rail Enclosure with Cooling Fan, 120 VAC Outlets & Power Cord

Altelix 14x11x7 Polycarbonate + ABS Vented DIN Rail Enclosure with Cooling Fan, 120 VAC Outlets & Power Cord

Altelix SKU: NP141107VFA1C-DIN

$297.25

Lead Time: Estimated Lead Time Is 1-2 Business Days From Time Of Order Entry

Availability: In Stock As Of 9/15/25

Important: Lead times vary frequently! Please contact us with any questions and/or concerns. We may be reached directly through chat or email us at enclosurehub@adalet.com

Our business hours are Monday-Friday 7:30 AM - 4:30 PM EST. Orders will not be entered outside of business hours.

Features
  • Includes (3) Steel 35mm Top Hat DIN Rails and Screws
  • Thermostat controlled cooling fan to help expel heat
  • Dual vents with rain shields and screens
  • No electrical wiring required
  • Available with either (2) or (4) internal pre-wired 120VAC power outlets
  • Pre-wired 5 foot 3-prong power cord
  • Integral internal mounting bosses for use with DIN rails
  • Durable Polycarbonate + ABS construction
  • Weatherproof and UV Stable
  • Meets NEMA 3R, 3RX and IP24
  • Gasketed lid with dual stainless steel latches
  • Tamper-Proof locking screw with key and provision for padlock
  • Can be mounted using external feet or internal mounting points
  • RF transparent for wireless devices
  • Multiple size knock-out holes on bottom of enclosure
  • Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware
  • Optional pole mount kits available
 Applications
  • DIN Rail mounted equipment
  • DIN Rail mounted network switches
  • DIN Rail terminal strips
  • DIN rail relay boxes
  • Multi purpose utility box
  • Home automation
  • Security and surveillance systems
  • LED controllers
  • Multi purpose DIN rail enclosure box
  • Network switches
  • Media converters
  • Outdoor weather protection
  • Protection against theft or damage
  • Concealment of equipment

 

The Altelix NP141107VFA1C-DIN NEMA enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. It is ideal for protecting DIN rail mounted devices from harsh environments and tampering.

Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.

Available with (2) or (4) 120VAC Power Outlets
This enclosure is available with either (2) or (4) internal pre-wired 120VAC power outlets used to provide power to installed equipment. Mounted to the bottom of the enclosure they do not interfere with area used for installing equipment.

Cooling Fan Ventilation
The NP141107VFA1C-DIN features dual vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure. For applications which require the cooling fan to turn on at a lower temperature, this enclosure is also available with a 85°F (30°C) turn-on thermostat. With this option the fan turns on when the internal temperature reaches 85°F (30°C) and turns off when it drops to 59°F (15°C).

35mm Top Hat DIN Rails
Included with this enclosure are (3) 35mm top hat DIN rails. Using the included screws, these DIN rails mount to raised bosses located in the base of this enclosure. Up to (4) DIN rail kits can be installed into the enclosure base. Additional DIN rail kits can be purchased from Altelix (see accessories section). In addition, a large flat section in the base is also provided for use with the hook-n-loop tape included in the accessory kit.

RF Transparent Design
The NP141107VFA1C-DIN is ideal for WiFi applications. The non-metallic design of the enclosure will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless access points on the market.

Secure Your Equipment
These NP series enclosures feature a gasketed lid with dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.

Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.

Multiple Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.