Features
|
Applications
|
The Altelix NP141109PA1C NEMA 4X enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two internal pre-wired 120VAC power outlets are provided to power your equipment.
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.
Increased Interior Space
This enclosure features an extra deep gasketed lid, over 4 inches deep. With the generous size of this enclosure and extended lid the NP141109PA1C can accommodate a wide range of equipment.
Mount Additional Equipment in Lid
The extra deep lid of this enclosure is designed so that additional equipment can be mounted in the lid for even more versatility. Raised mounting bosses are provided for use with equipment mounting plates or up to (3) Altelix 35mm DIN Rail Kits (sold separately). A large flat section is also provided for use with the hook-n-loop tape included in the accessory kit.
Aluminum Equipment Mounting Plate
Included with this enclosure is a 1.5mm thick aluminum plate for mounting and securing equipment. The plate can be easily drilled and modified by the installer to suit unique site requirements.
Note: this enclosure is also available with a non-metallic PVC equipment mounting plate (see NP141109MA1C) and without an equipment mounting plate (see NP141109A1C).
Secure Your Equipment
These NP series enclosures feature dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.
Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements It meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66.
Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.
Multiple Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.
Material | PC+ABS Polycarbonate / ABS Blend |
Color | Gray |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Outer Dimensions (Height x Width x Depth) |
14.2 x 11.6 x 8.9 Inches (361 x 293 x 226 mm) |
Inner Dimensions* (Height x Width x Depth) |
9.5 x 8.7 x 7.6 inches (241 x 220 x 193 mm) |
Mounting Plate Material | 0.06 in. (1.5 mm) Aluminum |
Mounting Plate Dimensions | 8.9 x 8.5 in. (227 x 216 mm) |
Weight | 5.9 lbs. (2.7 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 |
Flame Rating | Meets UL94-V0 |
Industry Certifications | CE |
Knockout Sizes (Diameter) | (3) 0.62 in. (16 mm) (4) 1.02 in. (26 mm) (1) 1.30 in. (33 mm) |